LBPS310A-KIT LBPS311A LBPS312A Hardened PoL PoE Ethernet Extenders Hardened PoL PoE Ethernet Extenders Extends Power over Ethernet up to 1.2BLACK km over ordinary BOX voice-grade copper wire. Features Ethernet extension up to 2.2 km. Customer Support Information ® Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Quick Start Guide This quick start guide describes how to install and use the Hardened Ethernet Extender. This is the Hardened Ethernet Extender of choice for harsh environments constrained by space. Installation Transmitter: This is a PoL (Power over Link) transmitter. Data and power can be delivered at the same time through one pair copper wire to turn on and communicate with a Receiver via an RJ-11 phone jack or a 2-pin Terminal Block interface.
10/100Base-TX Hardened PoL/PoE Ethernet Extender ∞ ∞ Connect one end of the one pair copper wire to the RJ-11 phone jack or 2-pin Terminal Block interface of the Transmitter and connect the other end to RJ-11 phone jack or 2-pin Terminal Block interface of the Receiver. Data can be transmitted between the Transmitter and the Receiver via copper wire. Physical Description The Port Status LEDs and Power Inputs Transmitter ∞ ∞ Receiver DC Terminal Block Power Inputs: 2.5A @ 48VDC (Peak current 3.26A).
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power Input Assignment Power1 48VDC T:46-57V / R:46-57V DC Power2 Power Ground T:46-57V / R:46-57V DC Power3 Power Ground DC Jack Terminal Block Earth Ground DIP Switch Transmitter PoL Type Down Up Disable Power over Link Std (Standard) Standard line speed Better noise immunity Enable Power over Link Per (Performance) Better line speed Poor noise immunity Loc (Local) Set Receiver to Local Mode Std (Standard) Standard line speed Better noise im
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power over Link (PoL) Enabled Distance Data Rate Receiver PoE Output 300M 100Mbps 30.0W 400M 90Mbps 15.4W 600M 60Mbps 14.0W 800M 45Mbps 9.5W 1000M 35Mbps 7.0W 1200M 20Mbps 5.0W Power over Link (PoL) Disabled Power Supply Applied on Receiver Distance Data Rate Receiver PoE Output 1400M 15Mbps 30.0W 1600M 10Mbps 30.0W 1800M 3Mbps 30.0W Up to 2200M 1Mbps 30.0W The Reference Performance is tested on 24AWG Telephone wire (0.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Ethernet Extender Connection The RJ-11 and Terminal Block port pinouts: Pin 3: Tip, Pin 4: Ring. Use a telephone line to connect two RJ-11 or Terminal Block ports between two Hardened Ethernet Extenders. Functional Description ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment. Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiation: 10/100Mbps, full/half-duplex; Auto MDI/MDIX.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Preface This manual describes how to install and use the Hardened Ethernet Extender. The Hardened Ethernet Extender introduced here provides one channel for Ethernet over existing voice grade copper wire. The Hardened Ethernet Extender fully complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX standards.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Table of Contents Quick Start Guide............................................................................. 1 Installation........................................................................................ 1 Physical Description........................................................................ 2 The Port Status LEDs and Power Inputs ..................................... 2 10/100Base-TX and Ethernet Extender Connectors ...................
10/100Base-TX Hardened PoL/PoE Ethernet Extender Introduction The Hardened Ethernet Extender provides one channel for Ethernet over existing voice grade copper wire. This Hardened Ethernet Extender solution works in industrial applications or rugged environments. Product Overview Transmitter Receiver Product Features ∞ ∞ ∞ ∞ Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment. Ethernet port: Supports IEEE802.3/802.3u/802.3x.
/100Base-TX Hardened PoL/PoE Ethernet Extender ∞ ∞ ∞ ∞ ∞ Supports Power over Ethernet applications up to 1,200 meters (3,937ft.) for Max. 5 watts of power consumed by PoE powered devices. Power consumption: Enable Power over Link (PoL) function: Max. 65Watts Disable Power over Link (PoL) function: Transmitter: Max. 5W. Receiver: Max. 35W with PoE output, Max. 5W without PoE output. Power Supply: Redundant T:46-57V / R:46-57V DC Terminal Block power inputs and 48 VDC Latched DC JACK interface.
10/100Base-TX Hardened PoL/PoE Ethernet Extender One-Channel Hardened Ethernet Extender Ports The Hardened Ethernet Extender provides TX ports and one Ethernet Extender port. For the TX ports, it uses RJ-45 connectors and auto senses the speed of 10/100 Mbps. For the Ethernet Extender port, it uses RJ-11 and Terminal Block connectors and auto senses the speed of Link (below 20)/20/40/60/80/100Mbps.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Front Panel & LEDs LED Indicators The LED indicators give you instant feedback on the status of the Hardened Ethernet Extender: LEDs Power 1/2/3 State Steady Off Steady PoL Off PoE Link Line Speed PSE Output Steady Off Steady Fast Flashing Slow Flashing Off Indication Power received Power off Power Ethernet extension interface function is enabled No power is transmitted over Ethernet extension interface Powered device (PD) is connected Powered device (
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power over Link (PoL) Disabled Power Supply Applied on Receiver Distance Data Rate Receiver PoE Output 1400M 15Mbps 30.0W 1600M 10Mbps 30.0W 1800M 3Mbps 30.0W Up to 2200M 1Mbps 30.0W The Reference Performance is tested on 24 AWG Telephone wire (0.5 mm diameter, 1-pair wire, Cable impedance: 100 ohm).
10/100Base-TX Hardened PoL/PoE Ethernet Extender Installation This chapter gives step-by-step installation instructions for the Hardened Ethernet Extender. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
10/100Base-TX Hardened PoL/PoE Ethernet Extender User’s Manual 14
10/100Base-TX Hardened PoL/PoE Ethernet Extender Connecting to Power Redundant DC Terminal Block Power Inputs or 48-VDC DC Jack: Redundant DC Terminal Block Power Inputs Two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened Ethernet Extender. Step 1: Connect the DC power cord to the pluggable terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Power Input Assignment Power1 48VDC T:46-57V / R:46-57V DC Power2 Power Ground T:46-57V / R:46-57V DC Power3 Power Ground DC Jack Terminal Block Earth Ground User’s Manual 16
10/100Base-TX Hardened PoL/PoE Ethernet Extender Specifications Applicable Standards IEEE802.3 10Base-T, IEEE802.
10/100Base-TX Hardened PoL/PoE Ethernet Extender Operating Temperature -40 ~ 75 (-40 ~ 167 ) Tested for functional operation @ -40 ~ 85 (-40 ~ 185 ) Storage Temperature -40 ~ 85 (-40 ~ 185 ) Humidity 5 ~ 95%, non-condensing EMI FCC Part 15, Class A EN61000-6-4: EN55022, EN61000-3-2, EN61000-3-3 EN61000-6-2: EN61000-4-2 (ESD Standard) EN61000-4-3 (Radiated RFI Standards) EN61000-4-4 (Burst Standards) EN61000-4-5 (Surge Standards) EN61000-4-6 (Induced RFI Standards) EN61000-4-8 (Magnetic Field
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. © Copyright 2013. Black Box Corporation.
