Specifications

724-746-5500 | blackbox.com Page 11
Chapter 2: Overview
Table 2-1. Scaler components.
Number Component Description
1
S/PDIF Audio
IN connector
Connects to digital S/PDIF audio source
2
DIP switch For firmware update:
ON (UP): firmware update mode;
OFF (DOWN): normal mode
3
LED indicator (1) Signal LED (green)
4
LED indicator (1) Power LED (red)
5
IR sensor Used to receive the IR commands from IR
remote
6
Push button Down button
7
Push button Up button
8 Push button Menu/Enter button
9
Interlocking
power jack
Connects to 5 VDC power supply unit
10
Mini-USB port • Used for firmware update
• Connects to 5 VDC power supply unit
11
Stereo audio
IN
Connect to analog stereo audio source
12
HDMI OUT
connector
Connect to a HDMI display via an HDMI male-
male cable.
13
VGA IN
connector
Connect to a VGA source