User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 96
be accessed using SSH tunneling (except by the “root” user who can tunnel to any IP address
the console server can route to).
 If your destination computer is serially connected to the console server, set the Destination
as <port label>:3389. For example, if the Label you specified on the serial port on the console
server is win2k3, then specify the remote host as win2k3:3389. Or, you can set the
Destination as portXX:3389 (where XX is the SDT enabled serial port number). For example, if
port 4 is on the console server is to carry the RDP traffic, then specify port04:3389
Note http://www.jfitz.com/tips/putty_config.html has useful examples on configuring PuTTY for SSH
tunneling.
 Select Local and click the Add button.
 Click Open to SSH connect the Client PC to the console server. You will now be prompted for the
Username/Password for the console server user.
 If you are connecting as a User in the “users” group, then you can only SSH tunnel to Hosts
and Serial Ports where you have specific access permission.