User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 95
- SSH Tectia is leading end-to-end commercial communications security solution for the enterprise.
- Reflection for Secure IT (formerly F-Secure SSH) is another good commercial SSH-based security
solution.
For example, the steps below show how to establish an SSH tunneled connection to a network
connected device using the PuTTY client software.
 In the Session menu, enter the IP address of the console server in the Host Name or IP address
field.
 For dial-in connections, this IP address will be the Local Address that you assigned to the
console server when you set it up as the Dial-In PPP Server.
 For Internet (or local/VPN connections) connections, this will be the console server’s public IP
address.
 Select the SSH Protocol, and the Port will be set as 22.
 Go to the SSH -> Tunnels menu and in Add new forwarded port enter any high unused port
number for the Source port, for example, 54321.
 Set the Destination: IP details.
 If your destination device is network-connected to the console server and you are connecting
using RDP, set the Destination as <Managed Device IP address/DNS Name>:3389. For
example, if when setting up the Managed Device as Network Host on the console server you
specified its IP address to be 192.168.253.1 (or its DNS Name was
accounts.myco.intranet.com), then specify the Destination as 192.168.523.1:3389 (or
accounts.myco.intranet.com:3389 ). Only devices that are configured as networked Hosts can