User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 64
 Specify the Probe Addresses of two sites (the Primary and Secondary) that the console server is to
ping to determine if Network1 is still operating.
 Select the System: Dial menu option and the port to be configured (Serial DB9 Port or Internal
Modem Port).
 Select the Baud Rate and Flow Control that will communicate with the modem.
Note You can further configure the console/modem port (for example, to include modem init strings) by
editing /etc/mgetty.config files as described in Chapter 13.
 Check the Enable Dial-Out box in System: Dial and enter the access details to call the
remote PPP server.