User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 46
the Administrator can also set up users who are not a member of any Groups. They will have the
same access as users in the additional groups.
To set up new Groups and new users, and to classify users as members of particular Groups:
 Select Serial & Network: Users & Groups to display the configured Groups and Users.
 Click Add Group to add a new Group.
 Add a Group name and Description for each new Group, then nominate the Accessible Hosts,
Accessible Ports, and Accessible RPC Outlets(s) that you want any users in this new Group to be
able to access.
 Click Apply.
 Click Add User to add a new user.
 Add a Username and a confirmed Password for each new user. You may also include
information related to the user (for example, contact details) in the Description field.
Note The User Name can contain from 1 to 127 alphanumeric characters (you can also use the special
characters ―-‖, ―_‖, and ―.‖ ).
There are no restrictions on the characters that you can use in the user Password (each can
contain up to 254 characters). Only the first eight Password characters are used to make the
password hash.
 Specify which Group (or Groups) you want the user to join.
 Check specific Accessible Hosts and/or Accessible Ports to nominate the serial ports and
network connected hosts you want the user to have access privileges to.
 If there are configured RPCs, you can check Accessible RPC Outlets to specify which outlets the
user is able to control (that is, Power On/Off).