User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 154
To backup and restore using USB:
 Make sure the USB flash is the only USB device attached to the console server and click Prepare
Storage in the Local Configuration Backup menu.
 This will set a Volume Label on the USB storage device. This preparation step is only necessary
the first time, and will not affect any other information you have saved onto the USB storage
device. We recommend that you back up any critical data from the USB storage device before
using it with your console server.
 If there are multiple USB devices installed, you will be warned to remove them.
 To backup to the USB, enter a brief Description of the backup in the Local Configuration Backups
menu and select Save Backup.
 The Local Configuration Backup menu will display all the configuration backup files you have
stored onto the USB flash.
 To restore a backup from the USB simply select Restore on the particular backup you wish to
restore and click Apply.
After saving a local configuration backup, you may choose to use it as the alternate default
configuration. When the console server is reset to factory defaults, it will then load your alternate
default configuration instead of its factory settings:
 To set an alternate default configuration, check Load On Erase and click Apply.