User`s manual

_____________________________________________________________________
724-746-5500 | blackbox.com Page 123
 Enter a Name and optionally a Description for the EMD and select the pre-configured serial
port that the EMD will be Connected Via.
 You may optionally calibrate the EMD with a Temperature Offset (+ or - °C) or Humidity Offset
(+ or percent).
 Provide Labels for each of the two alarms (if used).
 Check Log Status and specify the Log Rate (minutes between samples) if you want to log the
status from this EMD. These logs can be views from the Status: Environmental Status screen.
 Click Apply. This will also create a new Managed Device (with the same name).
8.3.2 Environmental alerts
You can now set temperature, humidity and probe status alerts using Alerts & Logging: Alerts (refer to
Chapter 7).
8.3.3 Environmental status
You can monitor the current status of all EMDs and their probes.
 Select the Status: Environmental Status menu and a table with the summary status of all
connected EMD hardware will be displayed.
 Click on View Log or select the Environmental Logs menu and you will be presented with a table
and graphical plot of the selected EMD’s log history.