User`s guide

Web Manager for Regular Users

To Use SSH to Connect to a Device Through a Serial Port

For this procedure, you need the username configured to access the serial port,

the TCP port number, and the hostname of the CS or its IP address.

• To use SSH in a shell, enter the following command:

T To Close an SSH Session

Enter the hotkey defined for the SSH client followed by a dot “.”. The default

is “~.”

Note: Make sure you enter the escape character followed by a “.” at the beginning of

a line to close the SSH session.

IPDU Power Mgmt.

IPDU or “Intelligent Power Distribution Units” management allows you to

manage the power outlets on the AlterPath PM products. When you select the

“IPDU Power Mgmt.” option, if you have permission to manage outlets on an

AlterPath PM, two tabs appear at the top of the form, as shown in the

following figure, “Outlets Manager” and “View IPDUs Info”.

Figure 3-5: Regular User > IPDU Power Mgmt. Forms

You can access the forms under IPDU Power Mgmt. menu to manage outlets,

or view IPDUs information:

ssh -l username:TCP_port_number CS_IP_address