User`s guide

Installation and Configuration

2. Bring up a browser on the computer whose address you changed, enter the

CS’s default IP address, http://192.168.160.10 to bring up the

Web Manager, and log in.

Installing PCMCIA Cards

The front panel of the CS has two PCMCIA card slots as shown in the

following figure. You can insert and configure one card in each of the slots.

See Appendix C, “Supported PCMCIA Cards".

Figure 2-3: Front Panel PCMCIA Card Slots

T To Install a PCMCIA Card

1. Insert the PCMCIA card into slot 1 or slot 2.

2. Use the Web Manager to configure the PCMCIA card.

Note: A hard disk PCMCIA card is automatically mounted once it is inserted, and it

needs no configuration.

T To Remove a PCMCIA Card

Caution: Always use the Web Manager to eject a PCMCIA card. Any other method

may cause a kernel panic.

1. Eject the card by using the Eject button on the Web Manager’s PCMCIA

Management form, Expert > Network > PCMCIA Management > Eject

PCMCIA Slots