User`s guide
Installation and Configuration
42
5. To change the default static IP address, see your network administrator to
obtain a valid IP address.
6. Enter the domain name.
7. Enter the IP address for the Primary DNS (domain name) server.
8. Enter the IP address for the gateway.
9. Enter the netmask for the subnetwork.
The network configuration parameters appear.
10. Enter y after the prompts shown in the following screen example.
11. To confirm the configuration, enter the ifconfig command.
12. After the initial configuration proceed to the Web Manager to select a
security profile.
System IP[192.168.160.10]: CS_IP_address
Domain name[blackbox.com]: domain_name
Primary DNS Server[192.168.44.21] :
DNS_server_IP_address
Gateway IP[eth0] : gateway_IP_address
Network Mask[#] : netmask
Are all these parameters correct? (y/n)[n]: y
Do you want to activate your configurations
now? (y/n)[y]: y
Do you want to save your configuration to
Flash? (y/n)[n]: y