User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 41
Basic Installation Procedures
As shown in the sample screen below, the system brings up the
configuration wizard banner and begins running the wizard.
2. At the prompt, enter n to change the defaults.
3. Press Enter to accept the default hostname, otherwise enter your own
hostname.
4. Press Enter to keep DHCP enabled, or enter “n” to specify a static IP
address for CS. By default, CS uses the IP address provided by the DHCP
server. If your network does not use DHCP, then CS will default to
192.168.160.10.
Set to defaults (y/n)[n]: n
Hostname [CAS]: fremont_branch_CS
Do you want to use DHCP to automatically
assign an IP for your system? (y/n)[y] :