User`s guide

Installation and Configuration
38
Note: If your CS model is equipped with dual power supplies, make sure you turn
both power switches on. After system initialization, a beep sound may warn if
one of the power supplies is off.
T To Turn Power On Connected Devices
• Turn on the power switches of the connected devices only after you have
completed the physical connection to CS.
Configuring the Network Parameters
In preparation to make CS available on the network, collect the following
information from your system administrator and proceed with the network
configuration procedure.
• Hostname
• An IP address for CS
• Domain name
• DNS IP address
• Gateway IP address
• Network mask
• NTP server’s IP address (if you are using a time/date server)
Performing Basic Network Configuration Using the wiz
Command
The following procedure assumes that a hardware connection is made
between the CS’s console port and the COM port of a computer.
T To Log Into CS Through the Console
From your terminal emulation application, log into the console port as
root.
CS login: root
Password: bb