User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 25
CS and Power Management
The following table list the tasks for power management and where they are
described.
Configuring Ports for Power Management by Authorized Users
Administrators of connected devices who have power management
permissions can do power management while connected by using a “hot key”
that brings up a power management screen.
For IPMI power management the default hot key is Ctrl+p. For IPDU power
management the default hot key is Ctrl+Shift+I.
Configuring Ports for Power Management Using the CLI
CS administrators can use the CLI command with the config ipmi
options to manage power on IPMI devices while logged into the CS with
administrative rights. The ipmitool command is documented in the
BLACK BOX® Advanced Console Server Command Reference Guide.
Table 1-8: Tasks for Configuring Power Management
Task Where Documented
Configure users to manage power on IPDUs “To Configure a User for IPDU Power
Management While Connected To a Serial
Port” on page 276
Identify servers for IPMI power
management
“To Delete, Add, or Edit an IPMI Device to
Enable or Disable IPMI Power
Management” on page 142
Configure ports for power management by
authorized users
“To Configure a Serial Port for IPDU or
IPMI Power Management” on page 274.