User`s guide

Administration Menu & Forms
312
Figure 11-10: Expert > Administration > Backup Config > Storage Device
The following table describes the available fields when “Storage Device” is
selected from the “Type” drop-down menu.
Table 11-9: Expert > Backup Config Type Storage Device Form
T To Back Up or Restore the Configuration Files using an FTP
Server
1. Go to Administration > Backup Config in Expert mode.
The Backup Config form appears.
2. Select “FTP” from the “Type” pull-down menu.
3. Enter the IP address of the FTP server in the “Server IP” field.
4. Enter the directory path on the FTP server where you have write
permissions in the “Path and Filename” field. Enter the filename after the
Field Name Definition
Default
Configuration
The system saves the configuration in the storage
device but does not override the internal flash
configuration after reboot.
Replace
Configuration
The system saves the configuration in the storage
device with a flag REPLACE that is used by the
RESTORECONF utility to override the internal flash
configuration after reboot.