User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 305
3. Select Email, Pager, or SNMP Trap from the pull-down menu.
4. Click the Add button.
5. Enter “Port” in the Alarm Trigger field.
6. Configure the parameters selected in step 3, Email, Pager, or SNMP Trap.
See “Notifications” on page 295.
7. Click “OK.”
8. Click “apply Changes.”
Time/Date
Selecting Administration > Time/Date in Expert mode brings up the form
shown in the following figure.
Figure 11-6: Expert > Administration > Time/Date
You can use the Time/Date form in Expert mode to set the CS’s time and date
in one of the following two methods.
• Manual configuration by entering the time and date in the form
• Set up using the NTP server
Enabling Network Time Protocol (NTP) synchronizes the CS’s system
clock with an NTP server, which maintains the true time (the average of
many high-accuracy clocks around the world).
If you enable the “Network Time Protocol”, the following form appears.