User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 281
3. To change the port number used to access the serial port, enter another
number in the “TCP Port” field.
4. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
5. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
6. Specify stty options, if desired, in the “STTY Options” field.
7. To change the break interval, enter a new number in the “Break Interval”
field.
8. To change the break sequence, enter a new sequence in the “Break
Sequence” field.
9. To change the content of the login banner, enter new text in the “Login
Banner” field.
10. For a dedicated terminal, enter the IP address of the desired host in the
“Host to Connect” field.
11. Enter the type of terminal in the “Terminal Type” field.
12. Click “Done.”
13. Click “apply changes.”
Virtual Ports
When Virtual Ports is selected under Ports > Virtual Ports in Expert mode, the
following form appears.