User`s guide

Ports Menu & Forms
280
3. To change the port number for the serial port, enter another number in the
“TCP Port” field.
4. To assign a name to the port’s IP address, enter an alias in the “Port IP
Alias” field. (Console connection protocol only)
5. If connecting to a Microsoft Windows Server 2003 operating system
through the Emergency Management Services (EMS) console, enable the
“Windows EMS”. (Console connection protocol only)
6. If using AlterPath Bio for an additional layer of security, enable
“Biometric Authentication Required” field. (Console SSH connection
protocol only)
7. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
8. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
9. Specify stty options, if desired, in the “STTY Options” field.
10. To change the break interval, enter a new number in the “Break Interval”
field.
11. To change the break sequence, enter a new sequence in the “Break
Sequence” field.
12. To change the content of the login banner, enter new content in the “Login
Banner” field.
13. Click “Done.”
14. Click “apply changes.”
T To Configure Terminal Server Connection Options
Do this procedure if you have connected a computer terminal to a serial port.
1. Select the port and choose a terminal server (TS) profile from the
“Connection Protocol” drop-down menu on General form.
2. Select the “Other” tab.
The Other form appears.