User`s guide

Ports Menu & Forms
276
4. Click “Done.”
5. Click “apply changes.”
T To Configure a User for IPDU Power Management While
Connected To a Serial Port
Perform this procedure to allow a user to perform power management on a
device while connected to it through one of the CS’s serial ports.
1. Configure a serial port for IPDU power management as described in the
previous section.
2. To permit everyone to perform power management on this port, click the
“Allow All Users” radio button.
Figure 10-29: Expert > Ports > Physical Ports > Power Management>Allow
All Users
3. To restrict power management on this port to a set of users authorized to
access this port, click the “Allow Users/Groups.”
Figure 10-30: Expert > Ports > Physical Ports >Power Management >Allow
Users/ Groups