User`s guide

Ports Menu & Forms
272
You can use this form to make it possible for a user who is connected to a
device through the selected serial port to perform power management. While
connected to the device, the user brings up a power management menu or
dialog box by entering a hot key.
Note: “Enable power management” on this form refers to IPDU power management,
Applications > IPDU Power Mgmt.
Additional fields appear on the form if “Enable Power management on this
port” and “Enable IPMI on this port” are checked, as shown in the following
figure.
Figure 10-27: Expert > Ports > Physical Ports > Power Management
The following table describes the available fields in the power management
form.
Table 10-11: Expert > Power Management Form Fields
Field Name Definition
Enable Power Management
on this Port
Check mark to enable Power Management on the the
selected port(s).