User`s guide

Ports Menu & Forms
254
4. If you want to change any of the other current settings, see "To Configure
Serial Port Settings to Match the connected devices" on page 257.
5. To further configure the serial port’s connection protocol:
• For user access and authentication methods, see "Access" on page
259.
• To specify the TCP Port number, and configure modem initialization
and PPP options see "Other" on page 277.
6. If you are finished, click “Done.”
7. Click “apply changes.”
T To Configure a Power Management Protocol for an IPDU
This procedure assumes that an IPDU is physically connected to the selected
serial port.
1. Go to Ports > Physical Ports in Expert mode, select a port or ports to
modify, click the appropriate Modify Ports button.
The General form appears.
The port configuration section includes six forms in tabbed format as
shown in the following figure.
Figure 10-17: Expert > Ports > Physical Ports > Power Management Active
Tabs
2. Click the General tab.
The General form appears with the number(s) of the selected port(s) next
to the Done button at the bottom of the form.