User`s guide

Ports Menu & Forms
248
Figure 10-7:Connection Protocols > Console
4. If you want to change any of the other current settings, see "To Configure
Serial Port Settings to Match the connected devices" on page 257.
5. To further configure the serial port’s connection protocol:
• For user access and authentication methods see "Access" on page 259.
• To specify the TCP Port number and other port configuration options
see "Other" on page 277.
T To Configure a Serial Port Connection Protocol for a
Bidirectional Telnet
This procedure assumes that the selected serial port is physically connected to
a terminal. For more information on Bidirectional Telnet connection protocol
see "Bidirectional Telnet Protocol" on page 245.
1. Go to Ports > Physical Ports in Expert mode, select a port or ports to
modify, click the appropriate Modify Ports button.
The General form appears.
The port configuration section includes six forms in tabbed format as
shown in the following figure.
Figure 10-8: Expert > Ports > Physical Ports > Bidirectional Telnet Active
Tabs
2. Click the General tab.