User`s guide

Chapter 10
Ports Menu & Forms
This Chapter describes the “Ports” menu and the related forms. The following
table provides a description of the left menu panel in the Web Manager and
links to the detailed information and procedures.
Table 10-1: Expert > Ports Menu
Menu Selection Use this menu to: Where Documented
Physical Ports
Activate or deactivate the serial
ports. Set the parameters for each or
all ports. Configure specific
parameters for the serial ports where
IPDU devices are connected.
Page 239
Virtual Ports
Perform Clustering. This section
shows how to define and configure
slaves. One CS can be used as a
Master to control other CS (slaves)
units. All ports of the slave unit
appear as if they are part of the
master unit.
Page 281
Port Status
View the current status of each port.
The information provided here are
RS232 Signal Status and user
connected to each port.
Page 287