User`s guide

Security Menu & Forms
224
iv. Enter an optional alias in the “Alias” field.
2. Make sure that time, date, and timezone settings are synchronized on the
CS and on the Kerberos server.
Note: Kerberos authentication depends on time synchronization. Time and date
synchronization can be achieved by setting both CS and the Kerberos server
to use the same NTP server.
a. To specify an NTP server, see “To Configure Time and Date Using an
NTP Server” on page 306.
b. To manually set the time and date on the CS, see “To Manually Set
the Time and Date” on page 306.
c. Work with the Kerberos authentication server administrator to
synchronize the time and date between CS and the Kerberos server.
3. Set the timezone on CS by going to Administration > Time/Date in Expert
mode as per the following figure. The default is GMT.
Figure 9-10: Expert > Administration > Time/Date
4. Go to Security > Authentication> Kerberos in Expert mode.
The Kerberos form displays as shown in the following figure.