User`s guide

Security Menu & Forms
216
Figure 9-6: Expert > Security > Authentication > AuthType Form
Any authentication method selected for CS is used for authentication of any
user attempting to log into the CS through Telnet, SSH, or the Web Manager.
T To Configure the CS Login Authentication Method
1. Go to Security > Authentication.
The “AuthType” form displays, as shown in the figure 9-6.
2. To specify an authentication method for login to CS, select a method from
the “Unit Authentication” pull-down menu.
3. Click “apply changes.”
4. Make sure an authentication server is specified for the selected
authentication type.
Configuring Authentication Servers for Logins to CS
and Connected Devices
If you are configuring any authentication method other than Local, make sure
an authentication server is set up for that method.