User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 205
Network
Figure 8-42: Expert > Static Routes “Add” and “Edit” Dialog Boxes - Host
Route
The following table describes the fields that appear when you select a routing
type from the “New/Modify Route” dialog boxes.
T To Configure Static Routes [Expert]
See Table 8-17 on page 198 for the field descriptions.
1. Go to Network > Static Routes
The Static Routes form appears.
• To edit a static route, select a route from the “Static Routes” list, and
then select the “Edit” button.
• To add a static route, select the “Add” button from the form.
The system invokes the “New/Modify Route” dialog box.
2. Choose “Default”, “Network”, or “Host” from the “Route” pull-down
menu.
Table 8-18: Expert > Fields and Menus for Configuring Static Routes
Field or Menu Name Definition
Route
Choices are “Default,” “Network,” or “Host.”
Network IP
Appears only when “Network” route is selected. Type the IP
address of the destination network.
Network Mask
Appears only when “Network” route is selected. Type the
netmask of the destination network.
Host IP
Appears only when “Host” route is selected. Type the IP
address of the destination host.
Go to
Choices are “Gateway” or “Interface.”
[Adjacent field]
Type the IP address of the gateway or the name of the interface.
Metric
Type the number of hops to the destination.