User`s guide

Network Menu & Forms
170
T
To Configure an Ethernet PCMCIA Card
1. Install the Ethernet card and select “Ethernet” from the pull-down menu
on the PCMCIA Management form.
The “IP Address” and “Network Mask” fields appear on the Slot dialog
box.
2. In the “IP address” field, enter the IP address to assign to the Ethernet
port.
3. In the “Network Mask” field, enter the netmask to assign to the subnet.
4. Click OK.
5. Click “apply changes.
Configuring a PCMCIA Compact Flash Card or a PCMCIA Hard
Disk Drive
You can use the “PCMCIA Management” form under “Network” to configure
a PCMCIA Compact Flash card or a PCMCIA Hard Disk Drive. When you
select Compact Flash/Hard Disk from the pull-down menu, the dialog box
shown in the following figure appears.
Network Address
The network address of the Ethernet.
Field Name Definition