User`s guide

BLACK BOX® CS Installation, Administration, and User’s Guide 143
Applications
f. Enter a password for administering the remote device in the
“Password” field and go to Step 5.
4. To edit the configuration for a device, click the “Edit” button on the line
with the device’s name, and make the desired changes on the Edit dialog
box.
5. Click OK.
6. Click “apply changes.”
T To Manage Power on an IPMI Device
1. Go to Applications > IPMI Power Mgmt.
Entries for all previously-defined IPMI devices appear on the form.
2. To toggle the state of a device, click the adjacent light bulb icon.
3. To briefly turn the power off then on again, click the “Cycle” button.
T To Configure a Serial Port for IPDU or IPMI Power
Management
1. Go to Ports > Physical Ports
2. To select a port or ports to modify, click the appropriate “Modify Ports”
button, and then the “Power Management” tab.
3. To enable Power Management of a device connected to the current port
and plugged into a connected IPDU, click “Enable Power Management on
this port.”.
The following form appears.