User`s guide

Configuring CS in Wizard Mode
100
Note: You can perform advanced configuration in Expert mode including the option
of setting up data buffering separately for individual or groups of serial ports.
T To Configure Data Buffering
1. Select “Step 4: Data Buffering”
2. Click the “Enable Data Buffering” checkbox.
The “Destination” pull-down menu appears.
3. Select a location for the data files from the “Destination” pull-down menu
(either “Local” or “Remote”).
Additional pull-down menus and fields appear, depending on which
destination is selected.
4. When the destination is local, perform the following steps.
a. From the “Mode” pull-down menu, select “Circular” or “Linear” data
buffering.
b. Type a file size in bytes into the “File Size (Bytes)” field.
The file size should be greater than zero.
5. When the destination is remote, perform the following steps.