User manual

Chapter 3: Installation
724-746-5500 | blackbox.com
Page 15
3.2 Connections
Connections to the Wizard DP Extender units do not need to be carried out in the order given within this guide, however, where
possible connect the power in as a final step.
3.2.1 Transmitter video connections
Video connections are made between the host computer and the two DisplayPort sockets on the rear panel of the transmitter
unit.
3.2.1.1 To connect the video ports
1 Use the supplied DisplayPort video cable to link DP port 1 on the rear panel of the transmitter unit with the primary video out-
put socket of the host computer.
From the host
computer’s
secondary
DisplayPort
video output
From the host
computer’s
primary
DisplayPort
video output
2 If a second video display is required, use an additional DisplayPort video cable to link DP port 2 on the rear panel of the trans-
mitter unit with the secondary video output socket of the host computer.