Specifications

724-746-5500 | blackbox.com
Page 7
ACS253A-CT
Quick Setup Guide
Quick Setup
This section briefly describes how to install your KVM extender system and optimize the video signals. Unless you are an
experienced user, we recommend that you follow the full procedures described in the rest of this manual. Refer to the command
summary in Chapter 4 when following this procedure.
Figure QS-1. Quick Setup Instructions
Carry out the Monitor Setup
procedure (see its manual and
Chapter 5 in this manual).
Carry out the VGA Input Setup procedure
(see Section 6.2 in this manual).
Install system
1. Connect remote unit to KVM.
2. Connect local unit to CPU or switch.
3. Connect local and remote units with matching interconnection cable
(CATx, multimode, or single-mode fiber).
4. Power up the system.