Specifications

724-746-5500 | blackbox.com
Page 42
ACS253A-CT
Appendix B: Rackmount Options
Appendix B: Rackmount Options
Extender units can be mounted in a 19” rack using the mounting kit:
The ACS253A-Rackmount Kit contains the following parts:
M3x5 Screws (14)
Two small blanking plates
Narrow strip
Wide blanking plate
Base plate
Figure B-1. Rackmounting Kit
To mount a unit:
1. Align the holes on the base plate with the empty screw holes on the base of the extender unit.
2. Fasten the base of the unit to the plate of the mounting kit using the supplied screws.
3. Close the remaining gaps with blanking plates.
The kit enables you to mount various combinations of regular and double-width housings:
Figure B-2. One regular unit. Figure B-3. Two regular units.
(using two small plates). (using one small plate).