Specifications

724-746-5500 | blackbox.com
Page 32
ACS253A-CT
Chapter 4: Device Control
Tools
Use the Tools menu to set the position and size of the OSD window, adjust the sharpness for a fixed resolution setting,
set the color depth, reset the Extender system to its factory default settings or provide a test pattern.
Set the position of the OSD window.
Reset extender to factory default
settings.
Adjust sharpness (fixed resolution
modes only). When resolution is
changed by an imposed fixed
resolution, sharpness can be affected.
Use this option to switch between
three settings for optimum sharpness.
Select color depth
Display a “burst” pattern at the
remote console for monitor setup
Choose whether to automatically
adjust pixels per line and pixel
phase after a mode change
Back to main menu
Figure 4-10. Tools menu.
OSD
Use the OSD submenu to define the position and size of the OSD window. To view this menu, select the Tools icon from
the main menu and then select the OSD icon.
Manually adjust the horizontal
position of the OSD window
Manually adjust the vertical
position of the OSD window
Back to Tools menu
Toggle the size of the OSD
window between single and
double size
Figure 4-11. OSD submenu.