Specifications

QUICK SETUP
7
1. Quick Setup
This section briefly describes how to install your KVM extender system. Unless you are an
experienced user, we recommend that you follow the full procedures described in the rest of
this manual.
Ins
tall system
1. Connect Local unit to CPU or switch.
2. Connect Remote unit to KVM.
3. Connect Local unit and Remote unit with Multimode fibre cables.
4. Power up the system.
Done
YES
NO
Link LED
1
illuminated?
NO
NO
YES
Check p.s.u.’s and connection
to power outlet
Power LED
illuminated?
Check the fibre cable, and
fibre connectors
Check settings of graphic card
or boot CPU
Video OK LED²
illuminated?
YES
1.
Link LEDs are the LEDs at the fibre sockets –
depending on device ‚Fibre DVI 1’, ‚Fibre
DVI 2’ and/or ‚USB’.
2.
Video LEDs are the LEDs at the DVI at the
fibre sockets – depending on device ‚DVI1’
and/or ‚DVI 2’.