Specifications

OVERVIEW
13
2.7 How to Use This Guide
This guide describes the installation and configuration of the ACS1xxA – Extender. Although
the connection and operation of the system is relatively straightforward, you should consider
the following before getting started:
Connection & Compatibility
If you have purchased an Extender Kit, this will contain all the cables required to connect the
Local unit of your ACS1xxA KVM- Extender to your PC or KVM switch. Please see also:
Package Contents (page 14)
For information about connection and installation, see Installation, page 14.
DDC Information
Normally, it is not necessary to make any adjustments to the ACS1xxA - Extender. DDC
Information is continuously transmitted from the remote monitor to the CPU graphic card.
Compatibility
Devices with USB HID connectors are NOT compatible to devices with USB-2.0 connectors.
Devices with DVI Singlelink and DVI Duallink are compatible if the second fibre is not used.
Only one DVI Singlelink signal will be transmitted in this case.