User guide

Access Method
98 BLACK BOX ® Advanced Console Server
Step 3: Scroll down to the Profile section.
You can change the settings for all.ipno and all.protocol in this section.
Step 4: Scroll to the modem Section.
You can configure the parameter all.initchat here.
Step 5: Scroll to the PPP Section.
You can configure the parameter all.autoppp and all.pppopt here.
Step 6: Click the Submit button.
At this point, the configuration file is written in the RAMdisk.
Step 7: Make the changes effective.
Click on the Administration > Run Configuration link, check the Serial Ports/
Ethernet/Static Routes box and click on the Activate Configuration button.
Step 8: Save it in the flash.
Go to the link Administration > Load/Save Configuration and click the Save to Flash
button.