User guide

Appendix H - Web User Management
412 BLACK BOX ® Advanced Console Server
Step 3: If there are more groups to be deleted, repeat the steps 1 and 2.
Step 4: Click on the link Web User Management > Load/Save Web Configuration.
Step 5: Click on the Save Configuration button.
This will save the users added in the file /etc/websum.conf
Step 6: Click on the link Administration > Load/Save Configuration.
Step 7: Click on the Save to Flash button.
Adding and Deleting Access Limits
The default configuration has the access limits set according to the functionality of the Web
page.
• Pages or forms which causes the configuration to change will have FULL privilege (only
high-privileged users will have access to it).
• Pages which change the status of the board without changing the configuration will have
ADMINISTRATOR privilege;
• Pages with the system information will have MONITOR privilege.
• Only application pages will have USER privilege.
Changing access limits is not recommended, unless you need to create or change the web
server pages; even so, the user should place the web pages in the subdirectories with the
privilege desired. For example, a page with ADMINISTRATOR privilege should be placed in
/adm.
Adding an Access Limit
Step 1: Click on the link Web User Management > Access Limits.
Step 2: Click on the Add Access Limit button.