User guide

Appendix C - The pslave Configuration File
332 BLACK BOX ® Advanced Console Server
conf.ssh Location of the ssh utility. /bin/ssh
conf.locallogins This parameter is only necessary when authentica-
tion is being performed for a port. When set to
one, it is possible to log in to the BLACK BOX ®
Advanced Console Server directly by placing a “!”
before your login name, then using your normal
password. This is useful if the Radius authentica-
tion server is down.
0
all.host The IP address of the host to which the terminals
will connect.
200.200.200.3
all.term This parameter defines the terminal type assumed
when performing rlogin or telnet to other hosts.
vt100
all.userauto Username used when connected to a UNIX server
from the user’s serial terminal.
all.protocol (for
TS)
For the terminal server configuration, the possible
protocols are login (which requests username and
password), rlogin (receives username from the
BLACK BOX ® Advanced Console Server and
requests a password), telnet, ssh, ssh2, or
socket_client. See all.socket_port definition if
all.protocol is configured as socket_client.
rlogin
all.socket_port The socket_port is the TCP port number of the
application that will accept connection requested
by this serial port. That application usually is telnet
(23).
Table 28: TS Parameters
Parameter Description
Value for this
Example