User guide

Appendix C - The pslave Configuration File
312 BLACK BOX ® Advanced Console Server
conf.facility The local facility sent to syslog-ng from
PortSlave.
1 - 7
conf.group Used to group users to simplify the configu-
ration of the parameter all.users later on.
This parameter can be used to define more
than one group.
group_name:
user1, user2
conf.eth_ip Configured in Task 4: Edit the pslave.conf
file in Chapter 2 - Installation, Configuration,
and Usage. This is the IP address of the
Ethernet interface. This parameter, along
with the next two, is used by the cy_ras
program to OVERWRITE the file /etc/
network/ifcfg_eth0 as soon as the command
“signal_ras hup” is executed. The file /etc/
network/ifcfg_eth0 should not be edited by
the user unless the cy_ras configuration is
not going to be used.
200.200.200.
1
conf.eth_mask The mask for the Ethernet network. 255.255.255.
0
conf.eth_mtu The Maximum Transmission Unit size,
which determines whether or not packets
should be broken up.
1500
conf.lockdir The lock directory, which is /var/lock for
the BLACK BOX ® Advanced Console
Server. It should not be changed unless the
user decides to customize the operating
system.
/var/lock
Table 26: Parameters Common to CAS, TS, & Dial-in Access
Parameter Description
Value for this
Example