User guide

Chapter 3 - Additional Features
User Guide 251
Step 3: Click Syslog on the Configuration section.
Select the Syslog link. The following page will appear, giving information for
configuring syslog:
Figure 27: Syslog page 1
Step 4: Edit the configuration file and click on the Submit button
Step 5: Make changes effective.
Click on the Administration > Run Configuration link. Check the Syslog-ng box and
click on the Activate Configuration button.
Step 6: Click on the Administration > Load/Save Configuration and click on the Save to Flash
button.
This will save the file in the flash.
Wizard Method
Step 1: Bring up the wizard.
At the command prompt, type the following to bring up the PortSlave parameters
involved with the Syslog custom wizard:
wiz --sl