Installation manual

91
the samples. For the definition of Online Control function keys refer to 5.2.1
'Manual – Inject/Eject'.
6. Adding new experiments
6.1. Adding a new single experiment
!!!IMPORTANT!!!: Before creating a new experiment for automation make
a layout of how the new experiment should work and how you would like to
present the result. Check the parameter library first to see if the new
experiment already exists. If not, check in the pulse program library for an
existing pulse program and in the au program library for the acquisition and
processing programs to satisfy the plans for the new experiment. If you have
to create a new pulse program or have to write an au program, be sure to
follow to the nomenclature of file names, pulse widths and delay numberings
that Bruker has defined. Any deviation may result in a malfunction of the new
experiment. Always test out the new experiment before you add it to ICON-
NMR.
6.1.1. Layout of the new experiment
• Experiment: attached proton experiment (APT)
• Parameter file: C13DEPT135
• Pulse program: jmod
• Au programs: aunm au_zg
aunmp proc_1d