Installation manual

88
NOTE: The Automation begins changing the sample, locking, shimming,
adjusting the receiver gain, acquisition and processing. A history box on the
bottom of the “Automation Manager” window shows the detailed information
of what tasks have been completed or failed for experiment(s) that have been
setup to run on the samples. For a definition of the Online Control function
keys, refer to chapter 5.2.1 Manual – Inject/Eject.
11. Wait until the last sample has finished running and has been ejected
12. Click on ‘STOP’
13. Click on ‘Yes’
14. Turn the switch on the sixpack/case controller box to OFF
15. Remove all samples from the sample holder