Installation manual

8. Click on Automation mode button and select ‘Sixpack use’ or ‘NMR case’

9. Select “1” for First sample

NOTE: ICON-NMR gives you the option to lock and shim the sample prior

to running the automation or, if you have stopped or halted the previous

automation run, to continue on the sample already in the magnet. For that

purpose click on the small button next to “First sample in the magnet (locked

and shimmed)?” and a check mark will appear. The system will skip the

inject/eject, locking and shimming for that sample. In addition the user can

choose to process all acquired data sets or do it later. This option can be set

in the ICON configuration set up.

10. Click on ‘Start’

NOTE: At this point the “ICON-NMR / Auto Online Controls” window and

the “acquisition status icons” appears.