Installation manual

81
7. Click on the first line of Holder 2
8. Click on ‘Submit’
NOTE: The Status traffic light changes to yellow to indicate the holder is
ready to run and the experiment time is calculated. Proceed to “B. SAMPLE
RUN” to start the automation.
5.1.6. Set up of two or more holders with the same solvents and
experiments
1. Follow steps 1 through 5 of “5.1.1. Setup of one single experiment”
2. Click on ‘Copy’
NOTE: To copy the setup from one holder into another holder click on the
‘copy’ button. The number displayed in the window next to the ‘Copy’ button
is to how many holders it will copy. For this example use “1”. The next
holder will have the same setup as the previous one except that the Exp No is
incremented to the next number divisible by 10 (e.g. 20), this is the default
configuration. To change the experiment number increment refer to chapter
3.3 "General Options” or if the sample name increment is preferred, select
this option in the sample setup window by clicking on ‘Holder’ and selecting