Installation manual

59
• ‘according to experiment’s TE Parameter’: if selected, the
temperature value is been taken from the TE parameter
• ‘295K’: if selected, this value can be changed to the desired
temperature.
5. Click on the arrow next to the “Pre-insertion Temperature Set/Check
Routine” window and select one of the following options:
• ‘TESET; TEREADY 60 0.1’: if selected, TESET sets the
temperature while TEREADY has 2 arguments which can be
changed. The first defines the maximum time in seconds to wait for
the temperature to be reached. The second parameter determine the
accuracy of the reached temperature in Degree, may be set between
0.0 – 1.0.
• ‘XAU my_temperature_au_program’: if selected, a user defined
AU program can be used. The name has to be
”my_temperature_au_program”