Installation manual

program may lock on the wrong one. The Lock –noauto invokes only the

BSMS lock function and not the auto lock function. As a result, the system

will lock on the desired peak as determined by the current

[TOPSPINHOME]/conf/instr/spect/2Hlock file.

3.2.3. Automatic Tune / Matching

1. Click on Automatic Tune / Matching

NOTE: Some of the latest probes are equipped with automatic tuning and

matching capabilities (ATM). The TOPSPIN command atma tunes and

matches the probe automatically according to the NUC settings in the current

data set. To make use of this feature, follow the steps below.

2. Click inside the square next to Enable ATM Optimization

3. Click on Update Experiment List

4. Set the Experiment Dependent ATM Optimization Settings