Installation manual

head, all solvent tunefile is stored in the directory :

[TOPSPINHOME]/conf/instr/spect/prosol/[probe ID]

The probe head, solvent tunefile is stored in the directory:

[TOPSPINHOME]/conf/instr/spect/prosol/[solvent.probe ID]

• TUNE mytunefile: Computer shimming using a personal tunefile

created with edtune. This must have the name “mytunefile” This file

is not probehead or solvent dependent. It is stored in the directory:

[TOPSPINHOME]/exp/stan/nmr/lists/group.

• GRADSHIM: Shimming using the Gradient shimming method

defined in the TopSpin gradient shimming interface (gradshim). The

iteration control file for gradient shimming is defined in the

setup/automation menu.

• Skip Shimming: This option skips any shimming

• ROTATION-OFF; TUNESX; ROTATION-ON: This option will

stop the spinning, shim the sample using TUNESX, and then turn

the spinner back on again.

Shim the Sample

This option applies only for the Automation. Different settings can be selected

by clicking on the window.