Installation manual

36
Archiving Data
This option applies for both the Automation and Routine Spectroscopy. If
permission is granted, the user’s data (after processing has been completed) is
copied into a directory whose path is specified in the Archiving Directory box
(see 3.1.1.9).
Supervisor
This option applies for both the Automation and Routine Spectroscopy. If
permission is granted, the user can iconize the ICONNMR windows to access
other programs on the desktop of the operating system.
Essential Originator
This option applies for both the Automation and Routine Spectroscopy. To
use this feature, both the Originator and Essential Originator permissions have
to be enabled. The user must then fill in the originator information (see 3.1.1.5
User Specific Information box, steps 1 through 5) in the title field, for
Automation and in the set up window, for Routine Spectroscopy. The
experiment cannot be submitted unless the originator information is entered.
Manual Lock/Shim
This option applies for both the Automation and Routine Spectroscopy. If
enabled, the user is granted permission to activate the Manual Lock/Shim
feature in the Option menu in the Routine Spectroscopy or Automation
window.
For the run, the user can then choose between manual or automatic locking
and shimming.
Email Notification
This option applies for both the Automation and Routine Spectroscopy.
Permission can be granted to different users to be notified through E-mail
when an experiment or sample is finished. This feature requires an E-mail
address and appropriate software (see 3.1.1.8 Target Email Address).