Installation manual

19
6. Select nucleus: ‘1H’, change and Calculate the following parameters:
Standard parameters for 1H on channel F1 routed to amplifierA2
Tocsy spin lock pulse length 35
power level click on ‘calc’
Roesy spin lock pulselength 170
Power level click on ‘calc’
cw irradiation field [Hz] 50
power level click on ‘calc’
Standard parameters for 1H on channel F2 routed to amplifierA2
90 decoupler pulse length same as 90 deg.
transmitter
power level same as transmitter
cpd pulse length 100
power level click on ‘calc’
bilev (second cpd) power level same as cpd
Tocsy spin lock pulse length 35
power level click on ‘calc’
Roesy spin lock pulselength 170
Power level click on ‘calc’
cw irradiation field [Hz] 5
power level click on ‘calc’
NOE diff. Irradiation field [Hz] 5
Power level click on ‘calc’
Homo decoupling field [Hz] 40
Power level click on ‘calc’