Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Working with System Data
4-20
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Step 11 To proceed, type Y and press Enter.
Result: The Cisco Secure ACS Appliance exports the backup file to the specified
location and displays messages regarding the progress of the backup. Before
returning to the system prompt, the following message signifies the completion of
the backup process:
Transferring xxx completed.
Restoring ACS Data via the Serial Console
This section details how use the serial console to restore Cisco Secure ACS
Appliance data from an FTP server after having performed a backup. For more
information on backing up Cisco Secure ACS Appliance data, see Backing Up
ACS Data via the Serial Console, page 4-18.
Note This procedure is typically performed from within the HTML interface.
Before you begin
You must have the FTP server address and filepath, as well as the proper
credentials for writing to the FTP server (username and password). You also need
the name of the backup file and, if the backup was encrypted, the decryption
password.
Caution This procedure interrupts the use of the Cisco Secure ACS Appliance for AAA
services.
Caution This procedure overwrites current system data and replaces it with the backup
data.